fbpx

 Yilmaz Gearboxes

The power is 
under your control!


Reliable. Configurable. Available.

A HUGE QUANTITY OF AVAILABLE SIZES AND CONFIGURATIONS

Yilmaz Redüktör gearboxes offer solutions for the vast majority of industrial applications, including customised configurations.

ONE OF THE LARGEST GEARBOX MANUFACTURERS IN THE WORLD

Yilmaz Redüktor ranks among the top 6 world gearbox manufacturers with an annual production of around 330,000 units.

11 GEARBOX TYPES

In its portfolio, it has 11 series of gearboxes for both standard and demanding industrial applications. In addition, each gearbox type is individually configurable.

THE POWER IS UNDER YOUR CONTROL

Yılmaz Redüktör is a world-renowned industrial gearbox manufacturer with a tradition of more than 60 years.

MORE ABOUT YILMAZ REDÜKTÖR

Choose the correct gearbox

Numerous gearbox configuration options provide use in all types of industrial operations.

M Series
Foot-Mounted Helical Gearboxes

13 sizes
output torque 50 – 18,000 Nm
output speed 0.1 – 500 min

cast iron body, monoblock housing design, torque range and two or three stages can be in same housing, output flange and output shaft options, long life bearings and 58-62 HRc hardened and grinded gears

  • MR – helical geared motors, foot mounted
  • MV – Helical geared motors with IEC B5/B14 motor flange, foot mounted
  • MN – Helical geared units with IEC B5/B14 motor flange, foot mounted
  • MT – Helical geared units with solid input shaft, foot mounted

N Series
Flange-Mounted Helical Gearboxes

13 sizes
output torque 50 – 18,000 Nm
output speed 0.1 – 500 min

cast iron body, monoblock housing design, torque range and two or three stages can be in same housing, output flange and output shaft options, long life bearings and 58-62 HRc hardened and grinded gears

  • NR – Helical geared motors, flange mounted
  • NV – Helical geared motors with IEC B5/B14 motor flange, flange mounted
  • NN – Helical geared units with IEC B5/B14 motor flange, flange mounted
  • NT – Helical geared units with solid input shaft, flange mounted

E Series
Worm Gearboxes

8 sizes
output torque 5 – 1,000 Nm
output speed 0.1 – 400 min

transmission ratios 7.5 to 100 in one stage, higher ratios with double gearbox, output flange options, long life bearings

  • EV – worm-geared motors with IEC B5/B14 motor flanges
  • EN – worm-geared units with IEC B5/B14 flanges
  • ET – worm-geared unit with solid input shaft

D Series
Helical Geared Hollow Shaft Gearboxes

10 sizes
output torque 130 – 18,000 Nm
output speed 0.1 – 350 min

cast iron body, monoblock housing design, torque range and two or three stages can be in same housing, output flange and output shaft options, long life bearings and 58-62 HRc hardened and grinded gears

  • DR – helical geared motors, direct coupled flange
  • DV – helical geared motors with IEC B5/B14 motor flange
  • DN – helical geared units with IEC B5/B14 motor flange
  • DT – helical geared units with solid input shaft

K Series 
kuželočelní převodovky

10 sizes
output torque 80 – 15,000 Nm
output speed 0.1 – 400 min

cast iron body, monoblock housing design, torque range and two or three stages can be in same housing, output flange and output shaft options, long life bearings and 58-62 HRc hardened and grinded gears

  • KR – bevel geared motors, direct coupled flange
  • KV – bevel geared motors, IEC B5/B14 flanged input
  • KN – bevel geared units, IEC B5/B14 flanged input
  • KT – bevel geared units, solid input shaft

Industrial gearboxes

Y Series 
Helical-geared Horizontal-Type Gear Units

25 sizes
output torque 1,200 – 43,000 Nm
output speed 2.6 – 990 min

GGG40 nodular steel housings, cooling options including cooling coil, air/oil heat exchanger and external heat exchanger, forced lubrication options, long life bearings, hardened and grinded gears, output shaft options

  • YRM – helical geared horizontal type gear units with solid output shaft
  • YRD – helical geared horizontal type gear units with hollow output shaft
  • YRE – helical geared horizontal type gear units with extruder output

H Series
Industrial Helical-Geared Units

14 sizes
output torque 2,500 – 165,000 Nm
output speed 0.1 – 250 min

cast iron body, monoblock housing design, cooling options including external heat exchanger, internal cooling coil, integrated fan, external air/oil cooler, mounting from any side, forced lubrication options, long life bearings, hardened and grinded gears, output flange options, output shaft options including shrink disk

  • HT – helical geared unit with solid input shaft
  • HK – helical geared unit with IEC B5 input flange
  • HTE – helical geared unit with solid input shaft and extruder output option
  • BYT – helical geared unit with auxiliary drive

B Series
Industrial Helical-Bevel Gear Units

14 sizes
output torque 2,500 – 165,000 Nm
output speed 0.1 – 115 min

cast iron body, monoblock housing design, cooling options including external heat exchanger, internal cooling coil, integrated fan, external air/oil cooler,
mounting can be done from all surfaces, forced lubrication options, long life bearings, hardened and grinded gears, output flanges, output shaft options including shrink disk,
high power density – can achieve the highest rating at the smallest possible dimensions, can be mounted directly to the motor flange or to the output flange

  • BT – helical geared unit with bevel stage input and solid input shaft
  • HK – helical geared unit with IEC B5 input flange
  • HTE – helical geared unit with solid input shaft and extruder output option
  • BYT – helical geared unit with auxiliary drive

P Series
Planetary gearboxes, flange-mounted

10 sizes
output torque 1,000 – 50,000 Nm
gear ratio 3.5 – 3,000

high power density, used in mobile applications as well as in cranes, metal forming and construction machinery and wind turbines, GGG40 nodular steel housing and flanges, bevel and worm stage input options, standard IEC B5 motor flanges

  • PV..L – planetary geared electric or hydraulic motors with IEC B5 or C26, M46 flanges, flange-mounted
  • PN..L – planetary gear units with IEC B5 or C26, M46 flanges, flange-mounted
  • PT..L – planetary geared units with solid input shaft, flange-mounted
  • P..K – planetary geared motors and units with bevel-stage input, flange-mounted

R Series
Planetary Gearboxes, Foot-Mounted

10 sizes
output torque 1,000 – 50,000 Nm
gear ratio 3.5 – 3,000

high power density, used in mobile applications as well as in cranes, metal forming and construction machinery and wind turbines, GGG40 nodular steel housing and flanges, bevel and worm stage input options, IEC B5 Motor flanges

  • RV..L – planetary geared electric or hydraulic motors with IEC B5 or C26, M46 flanges, foot- mounted
  • RN..L – planetary gear units eith IEC B5 or C26, M46 flanges, foot-mounted
  • RT..L – planetary gear units with solid input flange, foot-mounted
  • R..K – planetary geared motors and gear units with bevel stage input, foot-mounted

How is a gearbox manufactured?

The entire manufacture of YR gearboxes takes place in-house in a factory
around 35,000 m2.
All from initial design to final product testing.

MORE ABOUT YILMAZ REDÜKTÖR
THE SECRET OF SUCCESS

Key properties

The different types of Yilmaz gearbox shafts and flanges guarantee use across a wide range of industrial areas and applications.

compact design and motor connection according to IEC standards

Most gearboxes are available as a compact assembly with a built-in electric motor or with an input interface for connection to standard motors in accordance with IEC standards.

MORE ABOUT GEARBOXES

industrial quality and renowned reliability

Gearboxes are developed and tested in their own development centres and are manufactured in modern factories in Istanbul, Turkey.
Gearbox castings (mostly mono-blocks to ensure the structure’s highest possible rigidity) are produced in their own foundry, all other parts are then machined on their own advanced and largely automated machining centres.

helpfulness towards their clients and their own people

Yilmaz Redüktör is a family-owned company that’s renowned for its customer-oriented and friendly approach towards business partners.
The company has a similar approach towards the hundreds of employees in their factories, who are considered to be wider family members rather than just a simple workforce. Safety, working comfort and regular senior management communication with standard employees are matter of course at Yilmaz Redüktör’s.

solutions for all applications

Yilmaz Redüktör not only offers a full range of standard compact and industrial gearboxes, but also a range of tailor-made solutions for a variety of industries.

Is the YR gearbox what you need?
Explore 2D and 3D models or try the on-line configurator.

2D and 3D DRAWINGSON-LINE CONFIGURATOR

THE POWER IS UNDER YOUR CONTROL

Special solutions for industrial applications

 You can’t choose from the standard offer of electric gearboxes? Do you need a special solution for your operation? 
Below there is just a selection of what can be customised or configured.

cranes and lifts

The product-range includes crane travel and lift solutions, including the possibility of step-less speed control with frequency converters (also Yilmaz Redüktör brand).

mixers and stirrers

Mixing materials requires special approaches due to high demands on the bearing node resistance, environmental corrosion and other specifics. In this area, we have also prepared solutions proven over the years in Yilmaz.

extruders

Extruders are another demanding type of application requiring special solutions. There are several available.

conveyors and more

Proven solutions for simple small conveyors or large conveyors requiring robust industrial gearboxes with auxiliary handling drives are also available.

More about special solutions can be found on the manufacturer’s website or in the catalogue.

Do you like YR gearboxes?
Send us a request.

Are you interested in the Yilmaz Redüktör brand?

Do you want to make a non-binding offer or recommend a solution for your application? Contact D2Drives. D2Drives is the exclusive distributor for Yilmaz Redüktör gearboxes in Czech Republic, Poland and Finland.

Contact us!

address:

Družstevní 1200/20, 789 85 Mohelnice

telephone:

420 583 453 043